BlockHeadUK

My LEGO®-related Rambles

  • Home
  • About
  • Micropolis
  • Tutorials
  • Around The Web
  • QR Visitors
  • BrickTubers Network
You are here: Home / Archives for Exploring Elements

Exploring Elements: 41400 – Andrea’s Play Cube

Sunday, 5th July 2020 By Caz

Friends 41400 - Andrea's Play Cube - Singer
Friends 41400 – Andrea’s Play Cube – Singer

I this article, I’m going to be exploring one of the range of Friends Play Cubes which was first released in January 2020, 41400 – Andrea’s Play Cube – Singer. There were 4 others in same series, one for each of the Friends characters (41401 – Stephanie Baker, 41402 – Olivia Researcher, 41403 – Mia Veterinarian and 41404 – Emma Photographer).

I picked this one up a few weeks ago as I was intrigued to see some of the new parts available in the series, and what could be done with them. I always like to build any set as per the instructions first, just to get a feel for it, even though this is quite a small set! However, I decided not to apply any of the stickers as I knew I was likely to be using the pieces for other things eventually.

Andrea's Play Cube Built
Andrea’s Play Cube Built

New Elements

64570 - Bracket 2 x 6 - 1 x 6 Inverted
64570 – Bracket 2 x 6 – 1 x 6 Inverted

64570 – Bracket 2 X 6 – 1 X 6 Inverted was first released in January 2020 in bright pink in all five cubes, and so far has only appeared in this colour in two other sets, both from the Trolls theme. However, a version in Tan is now available in 4 sets ranging from a Speed Champions Lamborghini (76899) to the Creator Expert Haunted House (10273). That might be a slightly more desirable colour for many builders.

Subsequent waves of the Friends Play Cubes have now seen this piece appear in Lime and Lavender.

Geometry-wise, it is very similar to its little sibling the 1X2 upward bracket, so there isn’t really much to tell on that score, although the larger size may well help MOC builders with bigger projects requiring such SNOT elements.

1x2 Piano Keybaord Tile
1×2 Piano Keybaord Tile

6293665 – Flat Tile 1X2, No. 278 is an excellent little printed piece representing one octave of a piano keyboard, which will no doubt come in handy for folks wanting to make realistic looking instruments for their MOCs, who perhaps don’t have enough room to use its bigger brother, the 1X4 tile variant (6284099). It is so far only included in 4 sets ranging in size from this cube up to the Creator Expert Haunted House.

Dark Azur Bird With Coral Highlights
Dark Azur Bird With Coral Highlights

One aspect of these Play Cubes which may be a source of frustration to collectors is the presence of a blind bag containing one of four colour variations of pet, with a different creature included for each Friends character. In Andrea’s case, she is accompanied by a bird, and in my example I received the Dark Azur version, 6289278 Bird, W/ 1.5 Hole, No. 12. While this mould has been around since 2018 in mostly Friends or Elves sets, the four dual-moulded colour combinations which come with Andrea’s cube are all new for 2020. You might receive 6287745 No. 10 in Bright Reddish Violet, 6287746 No. 11 in Lavender or, if you really strike it lucky, 6287744 No. 9 in Pearl Gold. They all share a slightly metallic darker lavender patch around the eyes, with Vibrant Coral accents.

In this wave of Play Cubes, you can expect to find a puppy to beg for treats from Baker Stephanie, a Hamster for Olivia to conduct her research on, a bunny for Vet Mia to care for and a cat for Emma to photograph. The bird, of course, will happily warble along to Andrea’s singing and piano playing.

Andrea In the wrong outfit!
Andrea In the wrong outfit! Oops.

As for Andrea herself, the hair and legs assembly are nothing new, but she has a face exclusive to this Play Cube, notably 6289290 Mini Doll, Head, No. 213. It looks like the yellow stripe of makeup above her left eye is about the only difference I can see. Also her outfit, 6259889 Torso, Girl, W/ Arm, No. 292 is another piece unique to this cube. Unfortunately, I inadvertently picked up the wrong Andrea when I came to photograph this set (it has been a while since I first built it), and I have used the version from 41373 Funny Octopus Ride which I built more recently. But you can see what she should look like from the image on the instructions! Incidentally, Olivia and Mia also get unique torso prints in this wave of cubes, while those for Stephanie and Emma have both appeared in only one other set to date.

The Play Cube Itself
The Play Cube Itself

And finally, of course, there are the two halves which form the cube itself, one of the main reasons I wanted to get this set! I must admit, when I first picked them up, I was expecting them to be a bit larger, but no matter.

This release has the front of the cube (64462 Box 3X8X6 2/3, W/ Hinge Male) in Transparent Bluish Violet with Glitter (6286239),  which is common to all 5 of the Friends. In subsequent waves, the colour of this front element changes and we now also have it in Transparent Medium Violet Opal (6294380) and Transparent Violet Opal (6288478).

Meanwhile, each Friends character has their signature colour for the rear of their cube (64454 Box 3X8X6 2/3, W/ Hinge Female), which does not change from wave to wave:

  • Andrea – Flame Yellowish Orange (6288310)
  • Stephanie – Medium Azur (6288312)
  • Olivia – Bright Purple (6288311)
  • Mia – Bright Yellowish Green/Lime (6288313)
  • Emma – Medium Lavender (6288309)

None of these cube elements have so far been seen in other sets, so let’s take a closer look at them.

Cube Geometry

Rear Cube Clasp With 1x2 rounded plate
Rear Cube Clasp With 1×2 rounded plate
Front Cube Clasp With 1x2 rounded plate
Front Cube Clasp With 1×2 rounded plate

The first thing I noticed was the clasp which keeps the cube shut and your Friends character safely stowed away for travel. It has pleasingly rounded corners to protect little fingers, which follow exactly the same curve as the Plate, Modified 1 x 2 Rounded with 2 Open Studs which has been around for a couple of years. I’m not sure what practical use this will be, but it was worth noting!

As the name of each half suggests, it is the equivalent of 3 bricks tall, and when the cube is closed, the studs and antistuds on top and bottom line up so that a single 1X6 plate will fit snugly across the join.

Cube Top Has 8 Open Studs
Cube Top Has 8 Open Studs
Cube Bottom Has 8 Antistuds
Cube Bottom Has 8 Antistuds

The cubes are therefore easily stacked on top of each other, open for display, or closed for storage, a nice touch that could see a reasonably large collection remain stable rather than teetering on top of each other on a shelf. And, of course, it means that they could attach to any other suitable System elements if required.

The hinge mechanism takes its geometry directly from the 6X8 Trapdoor Frame (92107) and Plate 4X5 W/ Shaft Ø3.2 (92099) which have been in common use for over 10 years. The bottom half of the cube hinge will also comfortably accommodate a 4L bar piece, which may provide alternative mounting arrangements in a MOC.

Hinge Parts Of The Two Halves
Hinge Parts Of The Two Halves
Cube Front & Trapdoor Frame Closed
Cube Front & Trapdoor Frame Closed
Cube Front & Trapdoor Frame Open
Cube Front & Trapdoor Frame Open

I decided to see how they would fit togther directly with the trapdoor and frame pieces. The cube front presented no trouble in the “open” position, but would not close as fully as I would have liked. A little bit annoying, but not much you can do about it. So what about the other half?

Bottom Half With Trapdoor Plate Down
Bottom Half With Trapdoor Plate Down
Bottom Half With trapdoor Plate Up
Bottom Half With trapdoor Plate Up

The trapdoor element can be mounted in the hinge in one of two ways to give studs up or studs down on the plate. Neither is very satisfactory due to the edge of the plate fouling the edge of the hinge mechanism of the cube. So it’s probably not much practical use either way up.

I then decided to see what would happen if I attached an 8X8 plate to the box, by way of adding a couple of plates to the closure studs. Does the plate sit flush? Nope!

Annoying Tiny Gap!
Annoying Tiny Gap!

Once again, the tiny extra bit of plastic at the hinge side prevents the plate from sitting flush and tightly covering the box. Oh well…

Internal Stud Arranagements
Internal Stud Arranagements

Moving inside, there are two studs and two antistuds in each half of the cube, arranged at 6 studs width apart. These are the main attachment points for the 2X6 bracket piece at the bottom of the cube (into antistuds) and the 1X6 plate used for decoration at the top (open studs). However, these two end up at different depths from the back of the box.

I did a quick experiment to try and reconcile the two, but it still left an annoying gap, which looked to be about half a plate high. Perhaps some advanced SNOT-work would sort it out, but it won’t be easy in the given space.

Odd Geometry Inside
Odd Geometry Inside

Making My MOC

Of course, in the tradition of such reviews, I decided to make a MOC of my own from the set – using the two big cube elements. And as a well-known Microscale worker, it will come as no surprise to see that I have come up with a tiny fold-away city in a box!

Night & Day Microscale Cityscape
Night & Day Microscale Cityscape

The two halves represent the same cityscape seen at night (with lots of twinkly stars in a twilight sky) and during the daytime. I’m not convinced about the yellow background here, and I’m sorely tempted to get the bottom half from one of Stephanie’s Cubes which will provide a much more suitable blue sky backdrop. And perhaps change the bright pink brackets for tan. But otherwise, I’m quite pleased with this, which is even smaller than the Micropolis scale I normally work in.

I hope you have enjoyed reading my analysis of this little set, which has potential for many unusual uses, I’m sure. Perhaps some GBC…? Who knows?!

Filed Under: Exploring Elements, Microscale, MOCs Tagged With: 41400, Andrea, friends, play cubes

BlockheadUK
BlockheadUK

Follow Me Elsewhere

YouTube Flickr
Instagram Twitter

Archives

  • May 2021 (18)
  • April 2021 (10)
  • March 2021 (6)
  • January 2021 (1)
  • December 2020 (2)
  • November 2020 (7)
  • October 2020 (9)
  • September 2020 (11)
  • August 2020 (15)
  • July 2020 (13)
  • June 2020 (11)
  • May 2020 (6)
  • April 2020 (9)
  • March 2020 (12)
  • February 2020 (11)
  • January 2020 (8)
  • December 2019 (3)
  • November 2019 (8)
  • October 2019 (11)
  • September 2019 (16)
  • August 2019 (12)
  • July 2019 (16)
  • June 2019 (12)
  • May 2019 (16)
  • April 2019 (14)
  • March 2019 (12)
  • February 2019 (11)
  • January 2019 (13)
  • December 2018 (23)
  • November 2018 (24)
  • October 2018 (22)
  • May 2018 (1)
  • April 2018 (1)
  • March 2018 (19)
  • February 2018 (16)
  • January 2018 (22)
  • December 2017 (54)
  • November 2017 (25)
  • October 2017 (6)

Categories

  • Advent (26)
  • AFOL Interview (10)
  • Architecture (12)
  • Bionicle (3)
  • Blockville Updates (27)
  • Brickheadz (4)
  • Bricktober (3)
  • Classic Space (11)
  • Creator Expert (1)
  • DOTS (12)
  • Events (4)
  • Exhibitions (28)
  • Exploring Elements (1)
  • Great Ball Contraption (29)
  • Haul (21)
  • Ideas (6)
  • Interviews With Caz (8)
  • LEGO House (6)
  • Livestream (19)
  • Meetups (6)
  • Micropolis (221)
  • Microscale (19)
  • Minifigs (28)
  • Minifigure Habitat (48)
  • Misc (6)
  • MOCs (70)
  • MODs (11)
  • Monofigure Habitat (14)
  • Monorail Layouts (1)
  • Mooncropolis (3)
  • Neo-Classic Space (4)
  • New Elementary Reviews (2)
  • New Mars (4)
  • Ninjago (2)
  • Ninjago District Expansion (18)
  • PAB (6)
  • Seasonal (6)
  • SigFig Swap (1)
  • Skærbæk Fan Weekend (3)
  • Star Wars (9)
  • Storage (1)
  • Technic (20)
  • Techniques (6)
  • The LEGO Movie (1)
  • The Road To Billund (6)
  • Train Layouts (5)
  • Video (5)
  • Virtual LEGO show (1)
  • Virtual Micropolis (8)

Unless otherwise stated, all images and text © 2017-2023 Caroline Mockett ARPS, All Rights Reserved.

LEGO® is a trademark of the LEGO Group. Blockhead is not owned nor operated by the LEGO Group.

Design by Mockett Media. Powered by the Genesis Framework.