BlockHeadUK

My LEGO®-related Rambles

  • Home
  • About
  • Micropolis
  • Tutorials
  • Around The Web
  • QR Visitors
  • BrickTubers Network
You are here: Home / Archives for boat studs

MOC: St. Octavius’ Church

Saturday, 24th February 2018 By Caz

Boat Studs Cladding
Boat Studs Cladding

A while ago I was messing about with some transparent boat studs (2654) and thought they would make interesting cladding for a Micropolis building. However, the difficulty using them is having to build the walls with plates facing studs-inwards. No the end of the world, but not as easy as studs-out would be.

It’s very straightforward to build square stuff with LEGO, but I also wanted to challenge myself to build something a little different, so I opted for an octagonal shape, mainly due to having an octagonal plate with open centre (6063) in my parts drawers, which I thought could possibly form the basis of the roof structure.

Octagonal Technique - Bodged Brackets
Octagonal Technique – Bodged Brackets

Getting the geometry right to make the plates fit snugly under the roof plate was tricky. I spent ages faffing about with various designs. The sides which were aligned orthogonally with the studs weren’t too difficult, but those on the 45° were proving to be a right pain. Eventually, I came up with this bracket arrangement. It wasn’t terribly stable and required some packing behind (the white plate and magenta tile in the picture) to stop it from wobbling.

The assembly was also quite tall, and I wasn’t sure how I was going to cram in another one lower down for stability. This would be required as otherwise the walls were liable to collapse at every opportunity. It was getting rather frustrating.

Octagonal Technique - Internal Bracing
Octagonal Technique – Internal Bracing

Eventually I came up with this internal bracing arrangement, connected in the middle vertically too, in order to stablise things as much as possible.

I got all eight walls up and the roof plate attached. So far so good. But then I put just a little bit too much pressure on one side when I was picking it up and – boom! – it was in pieces again.

Annoyed with myself, I gave up and went to bed.

Octagonal Technique - Walls Up But Fragile
Octagonal Technique – Walls Up But Fragile
Octagonal Technique - Revised Bracketing
Octagonal Technique – Revised Bracketing

As is the way with these things, a good night’s sleep brings fresh ideas. I kept the orthogonal pillars the same and reworked the angled versions. These are all held onto the plates via a stepped-off jumper (lime green in the picture) pushed into the hole of a 1×2 Technic brick (blue and bley).

The originals (with yellow bricks) had a decent gap between fixing points at each end of the big red plates. But the stud geometry, and the need to have a jumper plate on top of the diagnonally mounted walls meant they were a little closer together for those (see pillar with pink bricks). However, both versions were still much more stable and less prone to collapse than the first right angle bracket bodge had been. So I pressed on and reworked all four of the pillars for the 45° walls.

Right angled walls were held in place on the floor by being 1 plate lower than the tiles the remaining structure rests on. Diagnonal walls are mounted on an open stud at the bottom. The lowest plate’s middle tube underneath rests snugly in the hole in the round stud.

Octagonal Technique - Floor Tiling & Pillars
Octagonal Technique – Floor Tiling & Pillars

At the top under the roof, each of the yellow jumpers’ studs key into the single square extra pieces of the octagonal plate – marked in red here.

Octagonal Technique - Under Roof Attachment
Octagonal Technique – Under Roof Attachment

It’s much easier to see what’s going on from this low angle picture of a half-built structure.

Octagonal Technique - Try It For Size
Octagonal Technique – Try It For Size

As the roof wasn’t one continuous plate, I decided to put a pillar in the middle too, so it could rest on that if too much pressure was exerted in the wrong place on the roof. Once all the pillars were in place, it required a little bit of jiggling to get them all to line up with the underside of the roof plate, but when they do, it’s all rock solid!

Octagonal Technique - Walls And Central Pillar In
Octagonal Technique – Walls And Central Pillar In

I had proved the structure, but I didn’t want my building having red walls. Also, I didn’t have enough boat studs to cover them all, and what would it be?

In the course of ordering boat studs from Bricklink, I chose four different colours and thought they would look like stained glass windows. With some white versions around the base, I decided this would be a modern place of worship, St. Octavius’ Church. A few days later all the bits arrived and I am pleased with the way it has all come together.

MOC - St. Octavius' Church Front
MOC – St. Octavius’ Church Front

The main entrance is on the corner of the intersection, with a statue outside. Landscaping and flowers around the sides give another splash of colour. I wanted the structure to have a bit of stature too, so I left it on the 12×12 plate it had been designed on, and added white tiles to give a little step up all around the building.

MOC - St. Octavius' Church Rear
MOC – St. Octavius’ Church Rear

Watch the video on this Block by Blockhead:

Filed Under: Micropolis, MOCs, Techniques Tagged With: 1/4 block, boat studs, church, cladding, downtown zone, octagonal, snot, stained glass windows, studs in construction

BlockheadUK
BlockheadUK

Follow Me Elsewhere

YouTube Flickr
Instagram Twitter

Archives

  • May 2021 (18)
  • April 2021 (10)
  • March 2021 (6)
  • January 2021 (1)
  • December 2020 (2)
  • November 2020 (7)
  • October 2020 (9)
  • September 2020 (11)
  • August 2020 (15)
  • July 2020 (13)
  • June 2020 (11)
  • May 2020 (6)
  • April 2020 (9)
  • March 2020 (12)
  • February 2020 (11)
  • January 2020 (8)
  • December 2019 (3)
  • November 2019 (8)
  • October 2019 (11)
  • September 2019 (16)
  • August 2019 (12)
  • July 2019 (16)
  • June 2019 (12)
  • May 2019 (16)
  • April 2019 (14)
  • March 2019 (12)
  • February 2019 (11)
  • January 2019 (13)
  • December 2018 (23)
  • November 2018 (24)
  • October 2018 (22)
  • May 2018 (1)
  • April 2018 (1)
  • March 2018 (19)
  • February 2018 (16)
  • January 2018 (22)
  • December 2017 (54)
  • November 2017 (25)
  • October 2017 (6)

Categories

  • Advent (26)
  • AFOL Interview (10)
  • Architecture (12)
  • Bionicle (3)
  • Blockville Updates (27)
  • Brickheadz (4)
  • Bricktober (3)
  • Classic Space (11)
  • Creator Expert (1)
  • DOTS (12)
  • Events (4)
  • Exhibitions (28)
  • Exploring Elements (1)
  • Great Ball Contraption (29)
  • Haul (21)
  • Ideas (6)
  • Interviews With Caz (8)
  • LEGO House (6)
  • Livestream (19)
  • Meetups (6)
  • Micropolis (221)
  • Microscale (19)
  • Minifigs (28)
  • Minifigure Habitat (48)
  • Misc (6)
  • MOCs (70)
  • MODs (11)
  • Monofigure Habitat (14)
  • Monorail Layouts (1)
  • Mooncropolis (3)
  • Neo-Classic Space (4)
  • New Elementary Reviews (2)
  • New Mars (4)
  • Ninjago (2)
  • Ninjago District Expansion (18)
  • PAB (6)
  • Seasonal (6)
  • SigFig Swap (1)
  • Skærbæk Fan Weekend (3)
  • Star Wars (9)
  • Storage (1)
  • Technic (20)
  • Techniques (6)
  • The LEGO Movie (1)
  • The Road To Billund (6)
  • Train Layouts (5)
  • Video (5)
  • Virtual LEGO show (1)
  • Virtual Micropolis (8)

Unless otherwise stated, all images and text © 2017-2023 Caroline Mockett ARPS, All Rights Reserved.

LEGO® is a trademark of the LEGO Group. Blockhead is not owned nor operated by the LEGO Group.

Design by Mockett Media. Powered by the Genesis Framework.